What Is the Difference Between DIN S30 Steel Rail and DIN S20 Rail?

Aug 10, 2026

Lisa Zhang
Lisa Zhang
Lisa Zhang is a Senior Railway Equipment Specialist at GNEE RAILWAYWAYWAY RAILWAY RAILWAYWAYWAY RAILWAY RAILWAYWAY, specializing in rail procurement and track components. She provides technical solutions for steel rails, rail joints, and fastening systems under UIC, AREMA, and DIN standards.

What Is the Difference Between DIN S30 Steel Rail and DIN S20 Rail?

 

DIN S30 rail and DIN S20 rail are both light steel rail profiles manufactured according to the DIN 5901 standard, but they differ in weight, cross-sectional dimensions, load capacity, and recommended applications.

 

The main difference is that DIN S30 rail has a heavier and stronger cross-section than DIN S20 rail, providing higher bending resistance and better performance under heavier loads or more demanding track conditions.DIN S20 rail is typically selected for light-duty industrial tracks, narrow-gauge systems, mining lines, and material handling applications with lower axle loads. DIN S30 rail is preferred for industrial railway tracks, mine railways, quarry tracks, and applications requiring higher load capacity and improved wear resistance.

 

din standard light rail

 

Due to different rail profiles and dimensions, DIN S20 and DIN S30 rail components are not interchangeable. Fishplates, fishbolts, rail clips, and fastening systems must be matched to the specific rail profile to ensure proper installation and track performance.

 

GNEE RAILWAY RAILWAY supplies DIN 5901 S20 and S30 steel rails with matching rail accessories, including joint bars, fishbolts, and fastening components. Technical data sheets, material certificates (MTC), and profile selection support are available for project requirements.

 

Technical Specification Comparison: DIN S30 vs. DIN S20 Rail

 

Engineering Dimensions and Section Properties

 

DIN S30 and DIN S20 rails are both light steel rail profiles manufactured according to DIN 5901. The main difference between these two profiles is their cross-sectional size, linear weight, and bending performance.

 

DIN S30 rail has a linear weight of 30.03 kg/m and a larger cross-section compared with DIN S20 rail, which has a linear weight of 19.80 kg/m. The heavier profile of S30 provides higher bending resistance and improved stability under higher wheel loads.

 

The main dimensional differences between DIN S30 and DIN S20 rails are shown below:

 

S20 Rail Dimensions
S30 Rail Dimensions
Size Rail height(mm) Bottom Width(mm) Head Width(mm) Web Thickness(mm) Weight(kg/m)
S10 70 58 32 6 10
S14 80 70 38 9 14
S18 93 82 43 10 18.3
S20 100 82 44 10 19.8
S24 115 90 53 10 24.4
S30 108 108 60.3 12.3 30.03

 

Steel Grades and Mechanical Performance

 

DIN S20 and DIN S30 rails supplied by GNEE RAILWAY RAILWAY are available in Q235B and 55Q steel grades. The material selection depends on the required strength, wear resistance, operating conditions, and service life requirements of the track system.

 

Q235B is a commonly used carbon structural steel grade suitable for light-duty industrial rail applications. It provides reliable mechanical performance for low-speed material handling systems, factory tracks, warehouse transportation lines, and other applications where moderate loading conditions are expected.

 

q235b light rail

 

Chemical Composition of Chinese Standard(%) Mechanical Properties of Chinese Standard
Grade C Si Mn ≤ P ≤ S V Grade Yield strength (Mpa) Tensile strength (Mpa) Elongation (%) Hardness (%)
Q235 0.12~0.20 ≤0.3 0.3~0.7 0.045 0.045 - Q235 ≥235 375-460 ≥26 -

 

55Q is a higher-strength rail steel grade with improved tensile strength and wear resistance compared with Q235B. It is commonly selected for industrial tracks, mining applications, and rail systems requiring higher load capacity and longer service life under frequent operation.

 

55q light rail

 

Chemical Composition of Chinese Standard(%) Mechanical Properties of Chinese Standard
Grade C Si Mn ≤ P ≤ S V Grade Yield strength (Mpa) Tensile strength (Mpa) Elongation (%) Hardness (%)
55Q 0.50-0.60 0.15-0.35 0.60-0.90 0.045 0.045 - 55Q - ≥685 - ≥197

 

The final material selection for DIN S20 and DIN S30 rails should consider wheel load, operating frequency, track conditions, and required service life. GNEE RAILWAY RAILWAY provides material certificates (MTC) and technical documentation to verify steel grade and mechanical properties for each shipment.

 

Get DIN Rail Material & Price Details

 

Application Matching: Choosing Between DIN S20 and DIN S30 Rail

 

The selection between DIN S20 and DIN S30 rail depends mainly on wheel load, operating frequency, track conditions, and required service life. DIN S20 is generally used for lighter-duty industrial track systems, while DIN S30 provides higher load capacity and improved durability due to its larger cross-section and higher section modulus.
 

DIN S20 Rail Applications

 

DIN S20 rail is suitable for applications where moderate loading conditions and cost-effective track solutions are required. Its lower linear weight and compact profile make it easier to handle, install, and maintain in confined working environments.

 

Typical applications include light industrial transport tracks, factory material handling lines, narrow-gauge equipment tracks, and low-speed mining or tunnel auxiliary transport systems. It is commonly used for rail-guided carts, transfer trolleys, and internal logistics systems where operating loads are relatively limited.

 

factory material handling lines tracks rails

 

For projects requiring frequent operation, higher wheel loads, or longer service intervals, a heavier rail profile such as DIN S30 should be considered.

 

DIN S30 Rail Applications

 

DIN S30 rail is designed for more demanding industrial track applications where higher strength and improved wear resistance are required.

 

Compared with DIN S20, its larger cross-section provides better bending performance and improved stability under heavier operating conditions.

Typical applications include mining transportation tracks, industrial material handling systems, heavy-duty transfer cart tracks, and crane-related rail systems where the actual wheel load and operating conditions require a stronger rail profile.

 

mining transportation tracks

 

DIN S30 is also commonly selected for applications with higher running frequency, abrasive environments, or projects requiring longer rail service life.

 

The final rail selection should be based on the actual operating parameters, including wheel load, axle load, running speed, curve radius, support spacing, and environmental conditions.

 

GNEE RAILWAY RAILWAY can provide DIN S20 and DIN S30 rail technical data, material recommendations, and matching fastening solutions according to project requirements.

 

Request Rail Selection Support

 

Track Accessories and System Compatibility

 

DIN S20 and DIN S30 rails have different profile dimensions, including rail height, base width, and web geometry. Therefore, the matching track accessories must be selected according to the specific rail profile. Using incorrect joint bars, fishbolts, rail clamps, or rail pads may result in improper installation, reduced track stability, and premature component failure.

 

The main compatibility differences between DIN S20 and DIN S30 rail systems are shown below:

 

Accessory Category DIN S20 Rail System DIN S30 Rail System
Joint Bar / Fishplate Designed for DIN S20 rail profile Designed for DIN S30 rail profile
Fishbolt & Nut Matched according to S20 joint design Matched according to S30 joint design
Rail Fastening Clamp Suitable for 82 mm rail base width Suitable for 108 mm rail base width
Rail Pad Matched to S20 rail foot dimensions Matched to S30 rail foot dimensions

 

DIN S20 and DIN S30 rails require profile-specific joint and fastening components because of their different rail dimensions. Fishplates, fishbolts, rail clamps, and rail pads must match the corresponding rail profile, including the 82 mm base width of S20 and 108 mm base width of S30.

 

GNEE RAILWAY RAILWAY supplies matched fishplate kits and fastening components for both rail systems, with technical drawings and material certificates available for project verification.

 

Request Rail Accessories Matching

 

Selecting the correct accessories is essential to maintain proper rail alignment, load distribution, and long-term track performance.

 

Total Cost, Freight, and Supply Considerations

 

DIN S20 and DIN S30 rail selection affects not only track performance but also material consumption, transportation cost, and overall project budget. S20 rail has a lower linear weight of 19.80 kg/m, resulting in lower steel consumption per kilometer, while S30 rail provides a heavier cross-section and higher structural performance for more demanding operating conditions.

 

For international shipments, GNEE RAILWAY RAILWAY optimizes rail cutting lengths and packing methods according to container dimensions and project requirements. Common export lengths include 6 m and 12 m rails, while longer lengths can be arranged based on transportation conditions and project specifications.

shipping and packing of s20,s30 rails
DIN S20 Rail PI
DIN S20 Rail MTC
shipping and packing of s20,s30 rails

 

GNEE RAILWAY RAILWAY provides export packaging, loading planning, and shipping documentation support to help customers reduce logistics risks and ensure efficient delivery.

 

Request Rail Cost Evaluation

 

GNEE RAILWAY RAILWAY provides quality documentation and inspection support for DIN 5901 S20 and S30 rail projects. Each rail batch can be supplied with EN 10204 3.1 Mill Test Certificates (MTC), including heat number traceability, chemical composition, mechanical properties, and hardness test results. Rails are manufactured according to required dimensional tolerances for profile height, base width, head width, and straightness. Third-party inspection services from organizations such as SGS, Bureau Veritas (BV), TÜV, and Intertek can also be arranged, covering dimensional inspection, ultrasonic testing (UT), and surface quality verification.

 

Frequently Asked Questions

 

Q1: Can DIN S20 rail and DIN S30 rail be connected directly on the same track?

 

No. DIN S20 and DIN S30 rails have different profile dimensions, including rail height, base width, and joint geometry. Standard fishplates and fastening components are not interchangeable between the two systems. If both profiles are required in one track, a specially designed transition solution is needed to ensure smooth wheel passage and proper track alignment.

 

Q2: What is the HS Code for DIN S20 and DIN S30 steel rails?

 

DIN S20 and DIN S30 steel rails are generally classified under HS Code 7302.10.00, covering rails of iron or steel for railway or tramway tracks. The final customs classification should be confirmed according to the importing country's regulations.

 

Q3: What is the typical lead time for DIN S20 and DIN S30 rail orders?

 

The lead time depends on order quantity, rail length, steel grade, and required processing. Standard Q235B or 55Q rails in common lengths such as 6 m and 12 m can usually be prepared faster, while customized cutting, drilling, or special processing requires additional production time.