-
25Nov, 2025
Are There Maintenance Requirements for Rail Pads?
Rail pads require periodic inspection and, when worn or hardened, replacement. This article covers what to look for during inspection, the criteria for replacement, and how correct storage, installati
-
25Nov, 2025
What Role Do Rail Pads Play in Railways? Five Core Functions
Rail pads are small components with a large job: they sit between the rail foot and the sleeper, spreading impact, damping vibration, insulating track circuits, tuning vertical stiffness and protectin
-
25Nov, 2025
What Type of Rail Pad Is Used for 60 kg Rails: Thickness, Hardness and Fitting
A 60 kg rail such as UIC 60 or the Chinese 60 kg/m rail of GB/T 2585 takes an elastic rubber pad, usually 5-8 mm thick and 75-85 Shore A, clamped between the rail foot and the concrete sleeper. The pa
-
25Nov, 2025
How to Reduce the Risk of Aging Deformation of Rail Pads
Aging deformation of rail pads is caused mainly by heat, UV and ozone exposure, oil and solvent contact, and prolonged over-compression. The risk can be reduced at every stage: choose heat- and oil-re
-
25Nov, 2025
Why You Should Never Use Rail Clips to Replace Rail Pads
Rail clips and rail pads sit within millimetres of each other in the track, but they perform opposite functions. A clip generates clamping force; a pad absorbs vibration, distributes pressure and insu
-
25Nov, 2025
How to Purchase Rail Pads That Fit Your Track: A Practical Checklist
Rail pads sit between the rail foot and the sleeper or baseplate, and the wrong pad can undo the benefit of the whole fastening system. This buying guide walks through the information you need before
-
25Nov, 2025
Why is the Selection of Rail Pads Crucial?
Why rail pad selection is one of the most consequential decisions in track design: the key selection factors — stiffness, hardness, material, environment and track category — and what goes wrong when
-
25Nov, 2025
How Do Rail Pads Enhance Passenger Comfort?
Rail pads improve passenger comfort by damping the impact and vibration generated at the wheel-rail interface before it reaches the vehicle, track and surrounding buildings. This article explains how
-
25Nov, 2025
What Role Do Rail Pads Play in Ride Smoothness?
Ride smoothness is determined by the track geometry and the dynamic wheel-rail contact, and the rail pad is one of the key components that influence both. Pad stiffness and damping control how much im

